BMW R69S
This is the second in the series of Gunze Sangyo High Tech models that I have completed.  They are challenging to put together,
but result in exceptional models.  There was a lot of additional detail added to the original kit and the only thing I should have
replaced was the seat, which seems oversized and doesn't sit quite right.

Base Kit(s):   Gunze Sangyo BMW R69S (kit number 621)     

Finished:        Sep 2011

Modifications/Additions:
- spoke nipples (vinyl tubing) added
- rear wheel axle and axle tightening nut
- oil dipstick top
- upper engine mount
- springs, rods and details for rear brake mechanism
- top of rear shocks and front forks machined from aluminum
- clutch mechanism added (I know, it's backwards on the photos)
- lots of Scale Hardware simulated and threaded bolts, nuts and screws.
- rechromed exhaust pipes, handlebars and air intake tubes (done by
ChromeTech USA)
- paint is Tamiya gloss black lacquer, airbrushed and various Alclad II metallic paints

Awards:
Toronto Model Car Show, Toronto, ON Sep 2011, 2nd place Motorcycles
Ajax XXXI, Ajax, ON October 2011, 2nd place Motorcycles
Kingston Modelrama, Kingston, ON, May 2012 - 2nd place motorcycles

Click on Thumbnail to see detailed image.  These images are 1024 x 768 and should load reasonably quickly,
depending on your connection speed.  
Evan Jones Motorcycle Models